Elite Garage Door Logo

How to Safely Replace the Springs of Your Garage Door

Broken Spring Repair aurora

Introduction: Why are Garage Doors Springs so Important?

Springs are the most important part of a garage door as they provide the tension that keeps the door in place. 

These springs can be used for both residential and commercial uses. They are easy to install and are made from high-quality steel.


What You Need to Know About Replacing the Springs of Your Garage Door

Garage door springs are made from steel wire that is wound around a series of coils and then heat-treated to make them more durable. The tension on the spring is what makes it strong enough to lift heavy doors and keep them up when they’re open.


Replacing garage door springs can be dangerous if you don’t know what you’re doing, so it’s best left up to a professional who knows how to do this safely. Your garage door springs are the pulleys that keep your garage door open or closed. If your garage door springs break, it can mean having to replace them entirely. Replacing them is not recommended unless you know what you’re doing.

The Steps Involved in Installing Garage Door Springs

The installation of new springs is a straightforward process, but it can be a bit tricky to get the hang of it. Follow these steps to install your new springs and get your garage door working again.

1) Locate the two mounting brackets that are located on each side of the garage door track.

2) Remove the old spring from one bracket by unscrewing the bolts, making sure not to lose any parts.

3) Install the new spring into one bracket by screwing in the bolts and positioning it so that the hooks on each end go around the eyelets on each side of the bracket.

4) Repeat steps 1-3 for another side of the door.

Conclusion: Complete Guide for Replacing a Broken Spring on a Garage Door

In conclusion, replacing a spring is not as difficult as it may seem. All you need to do is follow these steps:

– Remove the old spring from the door

– Drill out the old screw hole in the frame and insert a new screw

– Insert the new spring into position and reattach it with screws

– Test your work by pushing on both sides of the door